Chapter 1 Installing Cisco Unified Videoconferencing Manager
How to Perform
c.Choose Disable streaming for this Cisco Unified Videoconferencing Desktop to disable streaming for the Desktop server that you are currently configuring.
Step 12 In the Cisco Unified Videoconferencing Desktop Hostname Configuration window, specify the hostname of the server that clients should use to connect to the Desktop.
Note Make sure that you specify the hostname that clients can resolve.
Step 13 In the Ready to Install the Program window, click Install.
Step 14 Click Finish.
Step 15 After installation is completed, verify that the Desktop server is operational:
a.Access the Desktop Server Administration interface by connecting to the following URL: http://<SERVERFQDN:PORT>/cuvm/admin
b.Log in using the default user name (admin) and password (admin).
c.Open the Status tab of the Desktop Server Administration interface, and verify that all four types of servers are connected.
Note The light next to each link indicates whether or not the connection to the target server or registration with the Gatekeeper is successful. When the light is red, a tooltip containing error details is available. Click the red light to view further error information.
Step 16 Remove the product
How to Perform Post-installation Procedures
•Confirming Installation, page
•Running the Cisco Unified Videoconferencing Manager Service, page
•Logging in for the First Time, page
•Obtaining a License, page
•Changing Server Name and Web Port, page
Confirming Installation
Procedure
Step 1 Wait
Step 2 Go to http://host-URL:port-number.
Installation Guide for Cisco Unified Videoconferencing Manager Release 5.6
|
| |
|
