5 Verifying the Hardware Installation
To verify the hardware installation, complete the following tasks:
•Check the cable connections.
•Check the state of the indicator lights.
|
|
|
Label | Activity | Description |
|
|
|
Power | Off | The device has no power. |
|
|
|
| Solid Green | The device is powered on. Normal operation. |
|
|
|
| Flashing Green | Upgrading firmware or acquiring an IPv4 |
|
| address. |
|
|
|
| Solid Red | Booting or firmware upgrade failed. |
|
|
|
WLAN | Off | Wireless is disabled, for both Radio 1 and |
|
| Radio 2 wireless networks |
|
|
|
| Solid Green | Wireless Radio 1 is in use. |
|
|
|
| Solid Amber | Wireless Radio 2 is in use. |
|
|
|
| Solid Blue | (WAP561 only) Wireless Radios 1 and 2 are |
|
| operating in concurrent mode. |
|
|
|
| Flashing | Transmitting or receiving data. |
|
|
|
LAN | Off | No Ethernet link. |
|
|
|
| Solid Green | GE Ethernet link is active. |
|
|
|
| Solid Amber | FE Ethernet link is active. |
|
|
|
| Flashing | Transmitting or receiving data. |
|
|
|
NOTE If you need help resolving a problem, visit the Cisco Small Business Support Community at www.cisco.com/go/smallbizsupport.
6 | Cisco Small Business WAP500 Series Wireless Access Point |
