Status and Statistics
Traffic Statisti cs
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 15
2
If the VAP has been configured, the table lists the SSID, the administrative
status (up or down), the MAC address of the radio interface, the VLAN ID,
the name of any associated scheduler profile, and the current state (active
or inactive). The state indicates whether the VAP is exchanging data with a
client.
You can click Refresh to refresh the screen and show the most current information.
Traffic St atistics
Use the Traffic Statistics page to view basic information about the WAP. It also
provides a real-time display of transmit and receive statistics for the Ethernet
interface, the Virtual Access Points (VAPs), and any WDS interfaces. All transmit
and receive statistics reflect the totals since the WAP was last started. If you
reboot the WAP, these figures indicate transmit and receive totals since the reboot.
To show the Traffic Statistics page, select Status and Statistics > Traf fic
Statistics in the navigation pane.
The Traffic Statistics page shows summary data and statistics for traffic in each
direction.
•Network Interface—Name of the Ethernet interface and each VAP and
WDS interface.
On WAP561 devices, WLAN0 and WLAN1 precede the VAP interface name
to indicate the radio interface (WLAN0 represents radio 1 and WLAN1
represents radio 2).
•Tota l P ac ket s—The total packets sent (in Transmit table) or received (in
Received table) by this WAP device.
•Total Bytes—The total bytes sent (in Transmit table) or received (in
Received table) by this WAP device.
•Tota l D rop pe d P ac ket s—The total number of dropped packets sent (in
Transmit table) or received (in Received table) by this WAP device.
•Total Dropped Bytes—The total number of dropped bytes sent (in Transmit
table) or received (in Received table) by this WAP device.
•Errors—The total number of errors related to sending and receiving data on
this WAP device.
You can click Refresh to refresh the screen and show the most current information.