1
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 5
Getting Started
This chapter provides an introduction to the Wireless Access Point (WAP) devices
web-based configuration utility, and includes these topics:
•Starting the Web-Based Configuration Utility
•Using the Access Point Setup Wizard
•Getting Started
•Window Navigation

Starting the Web-Based Configuration Utilit y

This section describes system requirements and how to navigate the web-based
configuration utility.
Supported Browsers
•Internet Explorer 7.0 or later
•Chrome 5.0 or later
•Firefox 3.0 or later
•Safari 3.0 or later
Browser Restrictions
•If you are using Internet Explorer 6, you cannot directly use an IPv6 address
to access the WAP device. You can, however, use the Domain Name System
(DNS) server to create a domain name that contains the IPv6 address, and
then use that domain name in the address bar in place of the IPv6 address.
•When using Internet Explorer 8, you can configure security settings from
Internet Explorer. Select Tools > Internet Options and then select the
Security tab. Select Local Intranet and select Sites. Select Advanced and
then select Add. Add the intranet address of the WAP device (http://<ip-