Cisco Systems WS-X4516 specifications The Supervisor Engine V provides the following features

Supervisor Engine V

Figure 1 Catalyst 4500 Series Supervisor Engine V (WS-X4516)

STATUS LED

WS-X4515	SUPERV
	ISOR EN
	GINE IV
	UPLINK 1
	UPLINK 2
STATUS
	LINE
	ACTIVE
	LINE
	ACTIVE
	ACTIVE

Gigabit uplink ports

RESET button

	UTILIZATION
	FLASH	CONSOLE	10/100
1%	EJECT		MGT
	100%		RESET
			LINK

Switch load
		Ethernet
indicators		management port
CONSOLE
Compact	port
Flash

port

77509

The supervisor engine includes interfaces for SNMP, console, and Telnet, and provides management functions, such as environmental status monitoring.

The Supervisor Engine V provides the following features:

•512-MB Onboard SDRAM memory

•512-KB NVRAM

•64-MB onboard Flash memory (in addition to removable Flash memory)

•96-Gbps switching capacity, 72 million packets-per-second actual forwarding rate

•Support for up to 32,000 MAC addresses for Layer 2 switching (up to 64,000 entries, 16-way associative lookup table)

•Support for up to 4,000 VLANs

–802.1Q VLAN tagging on all ports

–Cisco Inter Switch Link (ISL) tagging on all ports

•Up to 64,000 unicast and multicast forwarding entries, expandable to 256, 000 unicast and multicast IPV4 forwarding information base (FIB) entries

•Support for all Catalyst 4500 series switching modules (except WS-X4232-L3 and WS-X4019)

•Default Layer 2 forwarding at startup (hardware based)

•Broadcast suppression on a per-port basis

•Multicast suppression on a per-port basis

•Unicast suppression on a per-port basis

•EtherChannel at 10/100/1000 Mbps

•Protocol filtering on a per-port basis

•Dynamic protocol filtering

•Support for IEEE 802.3x flow control

•Hardware-based Layer 3 Switching

•Hardware-based multicast

•Hardware-based access lists

•IP telephony

Installation and Configuration Note for the Catalyst 4500 Series Supervisor Engine V

8 78-15590-02