Cissell CSBBYMV Anchoring and Leveling Press, Refer to Figure

Operation

Anchoring and Leveling Press

Refer to Figure 3.

REMOVE ACCESS PANEL
TO INSTALL CENTER
LEVELING BOLT
	RIGHT
CENTER	LEVELING BOLTS
LEVELING BOLTS
C

CENTER

LEVELING BOLTS

CAB85N

LEFT END

LEVELING BOLTS

CAB85N

Figure 3

1.Place machine in desired location.

2.Trace the 6anchoring holes onto the floor.

3.Move the press aside.

4.Drill the floor in all 6 places with a masonry bit so that it will accept the 5/8"-11 expansion anchors.

5.Insert 5/8"-11 expansion anchors into holes.

6.Using 5/8"-11 Grade 5 expansion bolts, expand each anchor by turning the bolt into the anchor until the bolt is secure and the anchor is fully expanded.

7.Remove the bolts and reposition the machine over the anchors.

IMPORTANT: Leveling the press is required. Failure to follow leveling instructions can cause misalignment of heads and buck and damage to the press and garments, as well as void warranty.

8.Place a level across carriage rails at A and adjust left end leveling bolts. Refer to Figure 3.

9.Move level to location B and adjust right end leveling bolts. Refer to Figure 3.

AJ0976