1Setup

Connection to a Computer

This product has three interfaces that can be used to receive printing data: a serial port (RS232C), parallel port (IEEE1284, Non-L. P. S.), and a USB port (USB1.1). An optional internal network interface can be added by your dealer.

To connect the cable, proceed as follows:

1.Turn OFF both power switches of the printer and the computer.

2.Connect one end of the interface cable to the interface connector on the back of the printer and secure it with locks or locking screws, where available.

3.Connect the other end of the interface cable to the interface connector on the computer and secure it with locks or locking screws, where available.

Parallel Interface Cable

Serial Interface Cable

USB Interface Cable

Note: If an optional network interface is used, the standard parallel port is removed from the printer, so the parallel interface cannot be used.

18