Printer Operation
Mode Settings
Printing a List of Settings
You can get a list of the configuration settings in two ways:
-Press MENU key whilst turning the printer on. The Power LED flashes and “Print Settings” is displayed on the LCD. After printing, the printer will enter Menu Setup Mode.
-You can access the configuration print via the “Test Mode, Print Pattern, Current Config” from the setup menu.
Machine Information
Model Number | : |
Boot Version | : **** |
ROM Version | : ******** |
ROM Date(DD//MM//YY) | : XX/XX/XX |
ROMCheck Sum | : **** |
Head Check | : OK |
Print Counter | : 0002.234km |
Service Counter | : 0002.234km |
Sensor Monitor | : 1.50V |
Option Interface | : None |
Current Menu Setting
[PageSetup Menu] |
|
Print Speed | : 7 IPS |
Print Darkness | : 12 |
Darkness Adjust | : 00 |
Print Method | : Thermal Transfer |
Continuous Media Length | : 4.00 inch |
Vertical Position | : 0.00 inch |
Horizontal Position | : 0.00 inch |
Sensor Select | : Rear Adj Sensor |
Media Sensor | : See Through |
Small Media Adjustment | : Off |
Small Media Length | : 1.00 inch |
Symbol Set | : PM |
[System Setup Menu] |
|
Sensor Level | : 1.4 V |
Paper End Level | : 2.80 V |
Cover Open Sensor | : Off |
Menu/Repeat Select | : Menu Key |
Buzzer Select | : On |
Metric/Inch | : Inch |
Max Media Length | : 10.00 inch |
Setting Lock | : Off |
Keyboard Lock | : Off |
Control Cod | : STD |
Emulation Select | : DM4 |
[After Print Menu] |
|
AutoConfigure | : On |
Function Select | : Tear |
Cutter Action | : Backfeed |
Paper Position | : 0.00 inch |
Repeat Key | : Disabled |
[Interface Menu] |
|
: 9600 | |
: None | |
: 8 bit | |
: 1 bit | |
: Yes | |
IEEE1284 | : On |
Note: Citizen continually enhances its printers with new options and settings based on our customer's requests. Extra or changed menu items may appear on the above print out in some cases.
35