Printer Operation
Setting the Media
When Using Front Sensors
|
| Minimum value mm (in) | Maximum value mm (in) | ||
A | Label width | 7.62 | (0.3) | 118.00 | (4.65) |
B | Liner width | 25.40 | (1.0) | 118.00 | (4.65) |
C | Left end of label | 0 | (0) | 2.54 | (0.10) |
D | Gap between labels | 2.54 | (0.10) | 812.80 | (32.00) |
E | Label length | 6.35 | (0.25) | 812.80 | (32.00) |
F | Label pitch | 6.35 | (0.25) | 812.80 | (32.00) |
G | Liner thickness | 0.06 | (0.0025) | 0.125 | (0.0049) |
H | Media thickness | 0.06 | (0.0025) | 0.25 | (0.01) |
I | Right end of notch | 8.3 | (0.32) | 11 | (0.43) |
J | Left end of notch | 0 | (0) | 4.7 | (0.19) |
K | Notch length | 2.54 | (0.10) | 17.80 | (0.70) |
L | Right end of black mark | 15.00 | (0.59) | — | — |
M | Left end of black mark | 0 | (0) | 1.5 | (0.06) |
N | Black mark width | 3.18 | (0.125) | 17.80 | (0.70) |
*Use a transparent sensor for label media gaps and media with black marks.
*Use a transparent sensor for fan fold media.
*If the label pitch is 1 inch or less, set the Small Media Adjustment menu to ON and match it to the label that uses the value of the Small Media Length menu.
When Using Adjustable Sensor
|
| Minimum value mm (in) | Maximum value mm (in) | ||
|
|
|
|
|
|
A | Label width | 25.24 | (1.0) | 118.00 | (4.65) |
|
|
|
|
|
|
B | Liner width | 25.24 | (1.0) | 118.00 | (4.65) |
|
|
|
|
|
|
C | Left end of label | 0 | (0) | 2.54 | (0.10) |
|
|
|
|
|
|
D | Gap between labels | 2.54 | (0.10) | 812.80 | (32.00) |
E | Label length | 12.70 | (0.50) | 812.80 | (32.00) |
|
|
|
|
|
|
F | Label pitch | 12.70 | (0.50) | 812.80 | (32.00) |
G | Liner thickness | 0.05 | (0.0025) | 0.125 | (0.0049) |
H | Media thickness | 0.05 | (0.0025) | 0.25 | (0.01) |
|
|
|
|
|
|
I | Right end of notch | 3.6 | (0.14) | 60.8 | (2.39) |
|
|
|
|
|
|
J | Left end of notch | 0 | (0) | 57.2 | (2.25) |
K | Notch length | 2.54 | (0.10) | 17.80 | (0.70) |
|
|
|
|
|
|
L | Right end of black mark | 15.00 | (0.59) | 66.5 | (2.62) |
|
|
|
|
|
|
M | Left end of black mark | 0 | (0) | 51.5 | (2.02) |
|
|
|
|
|
|
N | Black mark width | 3.18 | (0.125) | 17.80 | (0.70) |
|
|
|
|
|
|
*Use a transparent sensor for label media gaps and media with black marks.
*Use a transparent sensor for fan fold media.
*If the label pitch is 1 inch or less, set the Small Media Adjustment menu to ON and match it to the label that uses the value of the Small Media Length menu.
23