Printer Operation
Mode Settings
Menu Setting Table
Page Setup Menu - allows you to change settings related to the media or print quality.
System Setup Menu - allows you to change settings for the printer hardware and basic control systems. After Print Menu - changes how the printer reacts after the label has been printed.
Interfaces - changes interface parameters such as baud rate.
Machine Information, Test Mode - allows you to check and/or print test pages and information about the printer. Global Config menu - allows you to switch between 3 complete ‘config sets’ contained within the printer.
Menu Setting
Press the MENU key in print possible status to enter MENU Setup Mode. Use the keys on the operation panel according to the LCD display to setup the printer. The contents that can be setup on the printer are shown below. And the items that are actually displayed on the LCD are shown in [ ].
Top Menu | Sub Menu | Default | Menu | Remarks |
Page Setup | Print Speed | 7 IPS | 2 to 10 IPS | Printing speed setting. |
|
|
|
|
|
| Print Darkness | 12 | 00 to 30 | Adjusting print darkness. |
|
|
|
|
|
| Darkness Adjust | 00 | Fine adjustment of darkness commands. | |
| [Darkness Adj] |
|
|
|
|
|
|
| |
| Print Method | TT | TT (Thermal Transfer) Selection of Thermal Transfer (ribbon) or | |
|
|
| DT (Direct Thermal) | Direct Thermal. |
|
|
|
|
|
| Continuous Media | 4.00 inch | 0.25 to 32.00 inch | Setting media length of continuous media. |
| Length | 101.6 mm | 6.4 to 812.8 mm | Lower level = during mm mode. |
| [Cont Media Len] |
|
|
|
|
|
|
|
|
| Vertical Position | 0.00 inch | Adjusting printing start position. | |
| [Vertical Pos] | 0.0 mm |
| |
|
|
|
|
|
| Horizontal Position | 0.00 inch | Adjusting horizontal image position. | |
| [Horizontal Pos] | 0.0 mm |
| |
|
|
|
|
|
| Sensor Select | Rear Adj Sensor | Rear Adj Sensor | Selecting front fixed/rear adj. sensor. |
|
|
| Front Fixed Sen |
|
|
|
|
|
|
| Media Sensor | See Through | See Through | Selecting media sensor. |
|
|
| Reflect |
|
|
|
| None |
|
|
|
|
|
|
| Small Media | Off | On | Setting for small media. |
| Adjustment |
| Off |
|
| [Small Media Adj] |
|
|
|
|
|
|
|
|
| Small Media | 1.00 inch | 0.25 to 1.00 inch | Setting media length for small media. |
| Length | 25.4 mm | 6.4 to 25.4mm |
|
| [Small Media Len] |
|
|
|
|
|
|
|
|
| Symbol Set | PM | 50 symbols | Setting symbol set. |
|
|
|
|
|
System Setup | Sensor Monitor | – | – | Displays level of sensor that is currently |
|
|
|
| selected. |
|
|
|
|
|
| Sensor Level | 1.4 V | 0.0 V to 3.0 V | Selects threshold of the sensor. |
|
|
|
|
|
| Paper End Level | 2.80 V | 0.01 V to 3.00 V | Sets the paper end level. |
|
|
|
|
|
| Cover Open Sensor | Off | On | Sets the cover open sensor. |
| [Cover Sensor] |
| Off |
|
|
|
|
|
|
| MENU/REPEAT | MENU Key | MENU Key | Sets the MENU key. |
| Select |
| REPEAT Key |
|
| [MENU/REPEAT Sel] |
|
|
|
|
|
|
|
|
| Buzzer Select | Exec/Err | Exec/Err | Setting buzzer sounding conditions. |
|
|
| All |
|
|
|
| Error |
|
|
|
| Key |
|
|
|
| None |
|
|
|
|
|
|
37