Printer Operation
Mode Settings
Menu Setup Mode
If the MENU key is pressed while the printer is in the On Line Ready state, the printer enters menu setup mode. In this mode, the printer's configuration can be changed using the operation panel. During menu setting mode, the LCD indicates the current menu settings and the key function.
On Line
Ready
POWER ERROR
FEED
Main Menu
Page Setup
Exit Enter
POWER ERROR
FEED
PAUSE | STOP | Shift/Change | STOP |
PAUSE | |||
Exit |
| Enter/Save |
|
Shift/Change
MENU | MENU |
Functions of the keys
When you enter Menu Setup Mode, the LCD displays “Main Menu” on the top line and Page Setup below.
In the menu setup mode, the four keys become “cursor keys” to navigate the menu. Refer to the four small arrows in the centre of the keypad rather than the names of the keys.
FEED key (Shift/Change)
The 5 key (Feed key) goes up the menu system or selects a higher value
MENU key (Shift/Change)
The ∞ key (Menu key) goes down the menu system or selects a lower value
STOP key (Enter/Save)
The 3 key (Stop key) selects or saves the item or enters a menu
PAUSE key (Exit)
The 2key (Pause key) exits the current item (goes back) and eventually exits the menu system
The menu settings are stored temporarily in the printer’s memory. They are only permanently stored in the printer setup when you exit the menu system and say “Yes” to the “Save Settings” question.
Caution
Turning the power off while the printer is performing the “Save Settings” function could cause a
31