Manuals / Citizen Systems / Computer Equipment / Printer

Citizen Systems CBM-820 manual Producing a test print, Adjusting the dot alignment, Or like this

Models: CBM-820

1 143
Download 143 pages 14.83 Kb
Page 34
Image 34

4.9.3 Producing a test print

The following procedure can be used at any time to test the printer.

❏Turn on the printer and insert a piece of paper (page 11, 16).

❏Turn off printer power.

❏While holding down RELEASE, turn printer back on. Keep RELEASE depressed for a few moments until the printer beeps and the printer test print starts.

The printer test will continue until it reaches the end of the paper.

4.9.4Adjusting the dot alignment

You may never have to use the procedure described in this section, but after you have been using your printer for some time you may find that the dots of some graphics do not align correctly. For example, what should look like:

may come out looking like one of the following:

or like this

– 20 –

Page 33 Page 35
Page 34
Image 34
Citizen Systems CBM-820 manual Producing a test print, Adjusting the dot alignment, Or like this
Page 33 Page 35