Citizen Systems CBM-820 manual Esc @, ESC C n

ESC @

Fnction]	Initializes Printer
[Code]	ASCII		ESC	@
	Hexadecimal		1B	40
	Decimal		27	64
[Outline]	This command clears the data in the print buffer to initialize various settings.
[Caution]	•	The setting of the DIP switch is not re-read.
	•	The data in the reception buffer is not cleared.

ESC C n

[Function]	Sets Single Sheet Ejection Length
[Code]	ASCII		ESC	C	n
	Hexadecimal		1B	43
	Decimal		27	67
[Range]	0  n 127
[Outline]	This command sets a single sheet ejection length to n lines.
	•	If n = 0, the ejection length will not be set
[Caution]	•	Even if the line feed amount is changed after setting the ejection length, the latter will not
		change
	• The ejection length set here is meaningful only when FF is executed
[Default]	n = 0
[See Also]	FF

– 53 –