8.PRINT CONTROL FUNCTION
8.1List of Control Codes
Symbol | Code | Function | CBM910 | iDP3110 | |
(Hexadecimal) | |||||
|
|
|
| ||
LF | 0A | Line feed after print | O*1 | O*1 | |
CR | 0D | Carriage return and line feed | O*1 | O*1 | |
SI | 0F | Normal size character | O | O | |
SO | 0E | Double width character | O | O | |
US | 1F | Normal size character | O | — | |
RS | 1E | Double width character | O | — | |
CAN | 18 | Cancel data | O | — | |
DC2 | 12 | Inverted character | O | — | |
DC1 | 11 | Initialize | O | — | |
ESC + “B” | 1B, 42 | Feed paper continuously | O | O | |
ESC + “R” | 1B, 52 | Select international character | O | O | |
ESC + “t” | 1B, 74 | Select code page | O | O | |
ESC + “/” | 1B, 2F | Register sentence | O | — | |
ESC + “! ” | 1B, 21 | Print registered characters | O | — | |
ESC + “&” | 1B, 26 | Register | O | O | |
ESC + “%” | 1B, 25 | Enable/Disable registered characters | O*2 | O*2 | |
ESC + “K” | 1B, 4B | Print bit image | O | O | |
FS + “W”+ 1 | 1C, 57, 1 | Double height and width character | O | — | |
FS + “W”+ 0 | 1C, 57, 0 | Clear double height and width character | O | — | |
ESC + “A” | 1B, 41 | Set line spacing | — | O | |
DC4 | 14 | Clear double width character | — | O | |
DC3 | 13 | Power down function | — | O | |
DC2 | 12 | Power down function | — | O | |
ESC + “) ” + | 1B, 29, | Change memory switch | O | O | |
55(H) + n1 + n2 + AAH | 55, n1, n2, AA |
|
|
|
*1: Invalid in some case. Refer to the descriptions for LF and CR in Control Code Details.
*2: Invalid in some case. Refer to the descriptions for Valid/Invalid of
— 33 —
