Citizen Systems CBM-910 manual Usa = U.S.A

<Contents of Memory Switch Setting>

In square brackets ([ ]), choose one of the options for each setting item. Item marked * is the default setting.

1.Country (Selecting international character set) [*USA, FRA, GER, U.K, DEN, SWE, ITA, SPE, JPN] Selects a international character set.

For international character set, refer to International Character Code Table.

USA = U.S.A

FRA = France

SPA = Spain

SWE = Sweden	JPN = Japan
ITA = Italy	GER = Germany
U.K = U.K.	DEN = Denmark

2.Code page (Selecting code page)

[CP-437, Katakana, CP-858, CP-860, CP-863, CP-865, CP-852, CP-866, CP-857, Windows, CP-864, CP-869, *910Intl, *910JPN, Space]

Selects a code page.

For code page, refer to Character Code Table.

Among the character sets for model type, model F is defaulted to 910Intl and model J to 910JPN.

CP-437 = Codepage PC437	Katakana = Katakana
CP-858 = Codepage PC858	CP-860 = Codepage PC860
CP-863 = Codepage PC863	CP-865 = Codepage PC865
CP-852 = Codepage PC852	CP-866 = Codepage PC866
CP-857 = Codepage PC857	Windows = Codepage WPC1252
CP-864 = Codepage PC864	CP-869 = Codepage PC869
910Intl = 910 Emulation (International)	910JPN = 910 Emulation (Japan)
Space = Blank page for user’s setting

3.Emulation (Selecting 910/3110 Emulation) [*CBM-910, iDP-3110]

Sets command system to 910 Emulation or 3110 Emulation.

4.ACK Timing (ACK timing) [Before, Center, *After] *1

ACK output timing for parallel I/F can be changed in 3 steps. For details, refer to the description of Parallel Interface.

5.P.N.E. Sensor (Enable/Disable paper-near-end) [*Enable, Disable]

This setting allows selection between Enable/Disable of paper-near-end sensor.

6.P-ON Sel (Online status at Power ON) [*Select, Deselect]

Selects the status of the SEL switch on the operation panel at power ON.

— 20 —