7.2 Parallel Interface Type
Switch No. | Function | OFF | ON | Factory Setting |
1 | Character direction | Normal | Inverted | OFF |
* 2 (3110) | CR | CR | LF | OFF |
* 2 (910) | CR | Ignore CR | CR + LF | OFF |
3 | RESET in | Disable | Enable | ON |
4 | Memory switch | Disable Setting | Enable Setting | OFF |
*: Difference may occur in accordance with the emulation set by the memory switch.
After setting DIP switch No. 4 to ON, turning the printer power on with the SEL switch pressed and held causes the printer enter the Manual memory switch setting mode.
Serial
Parallel
— 32 —
