Manuals / Citizen Systems / Computer Equipment / Printer

Citizen Systems CMP-10 Precautions on Using Special Serial Cable, Precautions on Using AC Adapter

Models: CMP-10

1 40

Download 40 pages 54.86 Kb

Page 12

Precautions on Using Special Serial Cable

Precautions on Using Special Serial Cable

WARNING

●With one side of the connector connected to this product, do not touch the metal part of the other connector.

CAUTION

●Static electricity may cause breakdown of internal circuit of this product.

●Do not leave this product with a cable wound around it for a long time. Disconnection or discoloration may result.

●Plugging and unplugging the contactor shall be done securely in the correct direction.

Precautions on Using AC Adapter

CAUTION

●Do not use the product at a voltage and frequency other than specified.

●Do not use AC adapter other than specified.

●Before use, confirm that the power receptacle has sufficient capacity.

●Do not connect to the power receptacle where multiple connections are used.

●Do not step on, tap, or put any object, on the cable of the AC adapter.

●Before connecting or disconnecting AC adapter, turn the printer power OFF. Do the operation securely.

— 8 —

Image 12

Citizen Systems CMP-10 manual Precautions on Using Special Serial Cable, Precautions on Using AC Adapter

Contents

MOBILE THERMAL PRINTER FCC Declaration of Conformity Compliance Statements FCC Compliance Statement for American UsersEMI Compliance Statement for Canadian Users CE Declaration of Conformity EN61000-3-2 1995+A1 1998+A2 1998+A14 20αGENERAL PRECAUTIONS SAFETY PRECAUTIONS About PictogramDefinition of Pictogram DangerPrecautions in Handling Printer Precautions on Using Printer Precautions on Using Battery DANGERPrecautions on Setting Print Paper Carry used battery in recycling agentNGNG Precautions on Using Thermal Paper Print Paper Precautions on Using Special Serial Cable Precautions on Using AC AdapterTHE TABLE OF CONTENTS LIST OF COMMANDSMAINTENANCE AND SERVICE GENERAL SPECIFICATIONS1.1 Features 1. INTRODUCTION1.2 Included and Optional Accessories 1.3 Type ClassificationCMP - 10 - U 5 M 2. GENERAL SPECIFICATIONS FeatureParameters Feature ParametersFeature ParametersReliability 3.1 LED Indicators 3. EXPLANATION OF PRINTER PARTS3.2 Communication Port and Switch 3.3 Inside of Paper Cover 3.4 BuzzerWhen magnetic card was successfully read sounds once 10 Paper feed roller Feeds paper through the printing mechanism3.5 Bottom Surface and Battery Cover 3.6 Dimensions and Views Unit mm DC Jack4. OPERATION 4.1 Replacing the Paper Roll4.2 Method of Charging 4.3 Communication by IrDA The IrDA beam4.4 Communication Via Serial Port Cable Rubber projectionSerial port cover Lift and open the serial port cover Insert serial cableTo read the mag stripe card, it is necessary to send a special command to the printer 4.6 Removing the Battery Pack 4.7 Installing the Battery Pack 5.1 Auto Power OFF 5.3 Low Battery Detection5. FUNCTION 5.2 Interface Selection5.5 Self Testing and Internal Settings 5.4 Monitoring the Print Head Overheating5.6 Print Area 6. LIST OF COMMANDS Enabling/disabling the panel switches Setting the time interval for automatic Power OFFSpecifying/canceling the inverted characters Setting printer flags7. MAINTENANCE AND SERVICE Northern AmericaOther Areas 8.1 How to Mount Belt Clip 8. APPENDIX HANDLING BELT CLIP KIT8.2 Mounting Rubber Feet MEMO MEMO MEMO 0201E-0212 Printed in Korea Information Systems Division CBM Bldg., 5-68-10, Nakano, Nakano-kuTokyo 164-0001, Japan Tel +81-3 5345-7540 Fax +81-3