Citizen Systems CMP-10 manual Feature, Parameters

Feature	Parameters
Serial interface	Speed: 1200, 2400, 4800, 9600, 19200, 57600,
	115200 bps
	Interface: Bidirectional serial communication
	Signal level: RS-232C
	Data lenght: 8 bits
	Start bit: 1 bit
	Stop bit: 1 bit
	Parity: None
	Flow control: Xon/Xoff
	Connector: Motorola Star Tac
Input buffer	64 KB
Mag stripe reader	Track 1, 2, 3
LED color	Power LED: GREEN and RED
	Charge LED: GREEN and RED
Operation switches	Power switch 1, LF switch 1
Sensors and error monitoring	Paper end sensor, Open cover sensor,
	Head temperature, Low battery
Power consumption	Idle - approximately 2W
	When printing - approximately 15W
Battery	Battery type: Li-ion battery pack
	Cell Voltage: 3.7 V
	Number of cells: 2
	Battery pack voltage: 7.4 V
	Battery pack capacity: 2000 mAh
Battery charging time	Approximately 3 hours by main unit + AC adapter
Maximum lines printed with	40,000 lines
fully charged battery	(At temperature 20°C, standard setting, alphanumeric
	slide pattern printing. The number of lines may be
	changed by such condition as temperature, etc.)
Power supply monitoring	Auto Power OFF (programmable - from 1 to 60 min.)
	Low battery monitoring included.
AC Adapter	Model: 10AD-JU (for Japan, USA, and Canada)
	10AD-E (Europe)
	Input voltage 90 V - 264 V AC
	Output voltage 9.0 V DC 1.0 A
Operating Environment	Temperature: 5 – 40°C
	Humidity: 35 – 80% RH (No dew condensation)
Storage Environment	Temperature: –20 – 60°C
	Humidity: 10 – 90% RH (No dew condensation)

— 13 —