4.5 Reading Mag Stripe Card (Only Model with
To read the mag stripe card, it is necessary to send a special command to the printer.
For the command, refer to Command Reference supplied separately. If mag stripe card command is entered, Power LED lights red.
While the Power LED continues to light for 10 seconds, swipe the card be read during that time.
If 10 seconds has passed or reading is completed, the printer returns to normal mode.
Slide the card with the magstriped surface down to pass the magstripe over the reader part.
When reading has completed, buzzer sounds momentarily and Power LED changes to green.
— 24 —
