Citizen Systems PPU-700 user manual Removing Cutter Lock

4.9 Removing Cutter Lock

When cutter lock is used, opening the guide with the head up lever may fail. Forced opening may cause a break. Remove cutter lock in the following procedure.

1.Press the FEED switch or turn the printer power off and then on. The auto- cutter starts initialize operation to restore the cutter.

2.If the above operation is not successful for restoring the cutter, turn off the printer and turn the cutter release knob of the auto-cutter in the arrow direction using a pointed tool (such as pincette or ball-point pen). The blade of the auto-cutter will be restored.

3.Remove the paper remainder on the blade of the cutter by using tweezers or the like.

Cutter release knob

4.When the control box is set apart from the printer, turn the cross hole shown in the figure in the arrow direction to restore the blade.

— 33 —