CAUTION

Do not use or store this product in a place where it will be exposed to:

Flames or moist air

Direct sunlight

Hot airflow or radiation from a heating device

Salty air or corrosive gases

Ill-ventilated atmosphere

Chemical reactions in a laboratory

Airborne oil, steel particles, or dust

Static electricity or strong magnetic field

Otherwise failure, smoke, ignition, fire, or electric shock may occur. ● Place the printer on a flat, stable surface without vibration.

Otherwise dropping may cause injury.

Do not use the printer under the following conditions.

A state where the printer ventilation holes are blocked by a nearby wall or something

A state where any object is placed on the printer

A state where the printer is covered or wrapped by a cloth or bed clothing

Be careful about internal heat buildup, which could cause fire and deform the case.

Avoid using the printer near a radio or TV set or from supplying it from the same outlet as these appliances.

Avoid using the printer interconnected with a cable or cord that has no protection against noise. (For interconnections, use shielded or a twisted pair of cables and ferrite cores, or other anti-noise devices.)

Avoid using the printer with a device that is a strong source of noise.

• The printer may have an adverse effect on nearby radio or TV transmissions. There may also be cases when nearby electrical appliances adversely influence the printer, causing data errors or malfunction.

Use the printer with its grounding post connected to a convenient grounding facility.

If leakage occurs electric shock may result.

Do not connect the printer’s grounding post onto any of the following facilities.

Utility gas piping

A gas explosion could result

Telephone line ground

Lightning rod

If lightning strikes a large surge of current may cause fire or shock.

Utility water pipes

Plastic water pipes should not be used for grounding. (Those approved by a Waterworks Department may be used.)

Before connecting or disconnecting the grounding lead to or from the printer, always unplug it from supply outlet.

— 5 —

Page 9
Image 9
Citizen Systems PPU-700 user manual Gas explosion could result