13
English
DB566USB
Quick tuning:
Press and hold the [ , ] button for 1 second
or longer to begin station tuning.
Step tuning:
Press the [ , ] button to perform manual
tuning.

Preset memory function

Preset memory function can store up to 24 sta-
tions:
Six stations for each of FM1, FM2, FM3 and AM.
Radio Mode Operations

Listening to the radio

1. Press the [SRC] button and select the Radio
mode, then the radio will be on.
2. To select a preset band, press the [BND]
button, then select one of the preset bands
such as FM1, FM2, FM3 or AM. Every time
the [BND] button is pressed, the display will
change as:
FM1 FM2 FM3 AM FM1...
3. Press the [ , ] button to tune in the
desired station.

Seek tuning

1. Press the [BND] button and select the desired
band (FM or AM).
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning
is now available.
2. Press the [ , ] button to start automatic
station tuning.
When the [ ] button is pressed, search will
be performing in the direction of higher fre-
quencies. When the [ ] button is pressed,
search will be performed in the direction of
lower frequencies.

Manual tuning

There are 2 ways available: Quick tuning and
step tuning.
When you are in the step Tuning mode, the fre-
quency changes one step at a time. In the quick
Tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired
band (FM or AM).
∗ If “MANU” is not lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.

Manual memory function

1. Press the [BND] button, to select a band you
want to store in the memory.
2. Press the [ , ] button to tune into a desired
station.
3. Press and hold one of the [DIRECT] buttons for
2 seconds or longer to store the current station
into preset memory.

Auto store

Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a previ-
ously stored station remains un-overwritten at
the memory position.
1. Press the [BND] button and select the desired
band (FM or AM).
2. Press and hold the [ ] button for 2 seconds
or longer. The stations with good reception are
stored automatically to the preset channels.

Preset scan

Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press the [ ] button.
2. When a desired station is tuned in, press the
[ ] button again to continue receiving that
station.
Note:
Be careful not to press and hold the [ ] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing sta-
tions.