Clarion DB566USB manual Basic Operations

8. OPERATIONS

Basic Operations	Note: Be sure to read this chapter referring to the front diagrams of
	chapter “4. CONTROLS” on page 5.

English

!CAUTION

Be sure to lower the volume before switch- ing off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sud- den loud volume may hurt your hearing and damage the unit.

Turning on/off the power

Note:

Be careful about using this unit for a long time without running the engine. If you drain the carʼs battery too much, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [SRC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last Operation mode and will automatically switch to display that mode.

3.Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.

Selecting a mode

1.Press the [SRC] button to change the Opera- tion mode.

2.Each time you press the [SRC] button, the Op- eration mode changes in the following order:

Radio mode CD/MP3/WMA mode (USB mode) AUX mode Radio mode...

Notes:

If the CD mode is selected when no disc is inserted, the display shows “NO DISC”.

If no USB drive is inserted, USB mode will not be displayed.

Radio/CD Mode:

Main displayClock displayMain display

MP3/WMA/USB Mode:

Main-1 display (Track No., play time) Main- 2 Display (Folder No., Track No.) Title

DisplayClock DisplayMain-1 Display...

∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that functionʼs display, then revert back to the preferred display several seconds after the adjustment.

Adjusting the volume

Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreas- es the volume.

∗The volume level is from 0 (minimum) to 33 (maxi- mum).

Audio mode adjustments

1.Press the [A-M] button to select the Adjustment mode. The mode switches as follows each time the [A-M] button is pressed:

BASSTREBBALFADPrevious mode

2.Turning the [ROTARY] knob to adjust the selected Audio mode.

BASS (Bass) : Adjustment range : -7 to +7

TREB (Treble): Adjustment range : -7 to +7

BAL (Balance): Adjustment range : L13 to R13

FAD (Fader) : Adjustment range : F12 to R12

∗The display returns to the previous mode 7 seconds after the adjustment.

Note:

Bass and Treble can only be adjusted when the “Z-Enhancer” is off.

Switching the display

Press the [D] button to select the desired display.

Each time you press the [D] button, the display switches in the following order:

DB566USB 11