Clarion DXZ389RGUSB English, Bluetooth BB Operations, Mic Gain, Ring Vol, Auto Ans, Pin Code

Bluetooth BB Operations

English

●MIC GAIN

MIC gain can be set by each paired mobile phone device. Each registered device has unique MIC gain setting.

2-1. Select “MIC GAIN”.

3-1. Press the [w] or [z] button to change the MIC gain setting.

●RING VOL

This option is used to change the ringing volume.

2-1. Select “RING VOL”.

3-1. Press the [w] or [z] button to change the ringing volume.

●AUTO ANS

This is a setting to determine whether any incoming call will be automatically or manually answered.

∗The factory default setting is “ON”.

2-1. Select “AUTO ANS”.

3-1. Press the [w] or [z] button to select “ON” or “OFF”.

ON: Any incoming call is automatically answered in 4 seconds.

OFF: User needs to manually answer the call.

●PIN CODE

This PIN code is used during pairing mode. A maximum of 10 digits can be changed through the car stereo.

∗The factory default PIN code is “1234”.

2-1. Select “PIN CODE”.

3-1. Press the [ ] button.

4-1. Press and hold the [BND] button to clear the old PIN code.

5-1. Press the [x] or [v] button to remove the cursor.

6-1. Press the [w] or [z] button to select the desired digits.

7-1. Press and hold the [ ] button for 2 seconds or longer to store in memory.

●ADDRESS

This will hold the unique Bluetooth BB address. The address is 12 figures.

2-1. Select “ADDRESS”.

The Bluetooth BB address 6 figures appears in the display.

3-1. Press the [w] or [z] button to display.

●VERSION

This will display the software version of the Bluetooth BB.

●REFUSE

This function allows all incoming calls to be refused.

∗The factory default setting is “OFF”.

2-1. Select “REFUSE”.

3-1. Press the [w] or [z] button to select “ON” or “OFF”.

ON: All incoming calls are automatically refused.

OFF: Incoming call notification enabled.

●A-CONECT

This function allows the Bluetooth BB to be connected automatically with previously connected device. Connection can be established at any source mode.

∗The factory default setting is “ON”.

2-1. Select “A-CONECT”.

3-1. Press the [w] or [z] button to select “ON” or “OFF”.

ON: Automatic connection is enabled.

OFF: Automatic connection is disabled.

2-1. Select “VERSION”.

The Bluetooth BB version appears in the display.

36 DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB