Clarion DXZ388RUSB Sound Adjustment, Basic Operations, To change sound setting, English

Basic Operations

English

Sound Adjustment

You can adjust a sound effect or tone quality to your preference.

To change sound setting

1.Press the [SOUND] button to switch to the sound adjustment selection display.

∗The factory default sound setting is “Z- EHCR”.

2.Then press the [x] or [v] button to

select the sound adjustment mode. Each time you press the [x] or [v] button, the sound adjustment mode changes as following order:

“Z-EHCR” ↔ “BASS” ↔ “TREBLE” ↔

“BALANCE” ↔ “FADER” ↔ “S-W LPF” ↔ “S-W VOL” ↔ “HPF”

∗In the case of display blinking “ENT”, you can press the [ ] button to adjust the setting value.

∗The sound adjustment mode will be displayed for 2 seconds before showing the sound setting.

3.Press the [w] or [z] button to adjust the selected audio mode.

4.After completing settings, press the

[SOUND] button to return to the previous mode.

When “Z+FLAT” is set:

3-2. Press and hold the [ ] button for 1second or longer, bass/treble characteristics become flat and switch to the “CUSTOM ” mode.

When “CUSTOM ” is set:

3-1. Press the [x] or [v] button to select the

“BASS” or “TREBLE” mode to adjust.

When “EXCITE/IMPACT/B-BOOST” is set:

3-2.	Press the [	] button.
3-3.	Press the [w] or [z] button to adjust the
	setting in the range of –3 to +3.
	∗ The factory default setting is “0”.
3-4.	Press the [	] button to return to the
	previous mode.

●Adjusting the bass

This adjustment can be performed only when the Z-Enhancer Plus is set to “CUSTOM ”.

2-1. Select “BASS”.

3-1. Press the [w] or [z] button to select as following order.

“BASS(G)” ↔ “BASS(F)” ↔ “BASS(Q)”

∗The factory default setting is “BASS(G)”. 3-2. Press the [ ] button.

3-3. Press the [w] or [z] button to select the setting.

BASS(G) : The factory default setting is “0”. (Adjustment range: +7 to –7)

●Setting the Z-Enhancer Plus

This unit is provided with 4 types of sound tone effects stored in memory.

Select the one you prefer.

∗The factory default setting is “OFF”.

2-1. Select “Z-EHCR”.

3-1. Each time you press the [w] or [z] button, the tone effect changes in the following order:

“Z+FLAT” ↔ “CUSTOM ” ↔ “EXCITE” ↔ “IMPACT” ↔ “B-BOOST” ↔ “OFF”

Z+FLAT : user Z+FLAT

CUSTOM : user custom

EXCITE : bass and treble emphasized mid emphasized

IMPACT : bass and treble emphasized

B-BOOST : bass emphasized

OFF : no sound effect

BASS(F) : The factory default setting is “60”.

(Adjustment range: 60/80/100/ 200)

BASS(Q) : The factory default setting is “1”. (Adjustment range: 1/1.25/1.5/2)

3-4. Press the [ ] button to return to the previous mode.

14 DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB