Clarion DXZ388RUSB, DXZ389RGUSB, DXZ389RUSB owner manual Error Displays, English

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

	Error Display	Cause	Measure
CD/MP3/WMA/AAC	ERROR 2	A CD is caught inside the CD	This is a failure of CD deck’s mechanism and consult
		deck and is not ejected.	your store of purchase.
	ERROR 3	A CD cannot be played due	Replace with a non-scratched, non-warped-disc.
		to scratches, etc.
	ERROR 6	A CD is loaded upside-down	Eject the disc then reload it properly.
		inside the CD deck and does
		not play.
	ERROR 2	A CD inside the CD changer	This is a failure of CD changer’s mechanism and
changer		is not loaded.	consult your store of purchase.
	ERROR 3	scratches, etc.	Replace with a non-scratched, non-warped disc.
		A CD inside the CD changer
		cannot be played due to
CD
	ERROR 6	A CD inside the CD changer	Eject the disc then reload it properly.
		cannot be played because it
		is loaded upside-down.
	ERROR 2	The files are not proper MP3/	Use only properly encoded MP3/WMA/AAC files.
		WMA/AAC format.
USB/MTP/iPod	ERROR 3	The MP3/WMA/AAC files are	Use only properly encoded MP3/WMA/AAC files.
	(USB/MTP mode)	improperly encoded.
	ERROR 3	The iPod contains no audio	Insert an iPod containing audio files.
	(iPod mode)	files.
	CUR ERR	Overcurrent detection.	Disconnect the devices and reconnect. If the devices
			are still not recognized, try replacing with a different
			devices.
	HUB ERR	Do not support the HUB	Do not use the HUB devices.
		devices.

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

English

DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB 41