Radio Operations
Recalling a preset station | Preset scan |
English
Atotal of 24 preset positions
stations in memory. Press the corresponding [DIRECT] button or the [w] / [z] button to recall the stored radio frequency automatically.
1.Press the [BND] button and select the desired band (FM or AM (MW/LW)).
2.Press the corresponding [DIRECT] button or the [w] / [z] button to recall the stored station.
Note:
•Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.
1.Press the [ 
] button.
2.When a desired station is tuned in, press the [ 
] button again to continue receiving that station.
Note:
•Be careful not to press and hold the [ 
] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.
Manual memory
1.Select the desired station with seek tuning or manual tuning.
2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Auto store
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1.Press the [BND] button and select the desired band (FM or AM (MW/LW)).
2.Press and hold the [ 
] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
18 DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB
