CD Changer Operations
Note:
•The following operations are the same as for CD mode:
∗Pause
∗Track selection
∗Repeat play ∗Random play
See “CD/MP3/WMA/AAC Operations” (page 23- 26) for details.
CD changer functions
When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers.
Press the [SRC] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [SRC] button to select the CD changer for play.
∗If “NO MAG” appears in the display, insert the magazine into the CD changer.
∗If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.
Note:
•Some CDs recorded in
CAUTION
Displaying CD titles
This unit can display title data for
∗Title data for
1.Press the [DISP] button to change the title display.
Notes:
•If the CD playing is not a
•If a
Procedure to scroll a title
Set “SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the subsection “Setting the method for title scroll” in section “Operations Common to Each Mode”.)
●When set to “ON”
The title is automatically kept scrolling.
●When set to “OFF” To scroll just 1 time.
When you want to see the title again, in the title mode, press and hold the [DISP] button for 3 seconds or longer to scroll the title.
Selecting a CD
1.Press the [w] or [z] button to select the desired disc.
∗If a CD is not loaded in a slot of magazine, pressing the [w] or [z] button can not work.
English
DXZ388RUSB/DXZ389RUSB/DXZ389RGUSB 37