CD/MP3/WMA/AAC Operations
●Number of files or folders
1.Up to 255 files can be recognized per folder. Up to 510 files can be played.
2.Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.)
3.Some noise may occur depending on the type of encoder software used while recording.
Set the type of file to be played
When a single disc holds both normal CD type tracks and MP3/WMA/AAC type tracks, use this command to select which type of track to play.
∗Default setting is “CD”.
•When only one type of track (either music CD or MP3/WMA/AAC) is recorded on a disc, selecting either type will allow playback of the disc.
•When playing CCCD
1.Press the [OPTION] button.
2.Select
3.Press the [UP] or [DN] button to select “CD” or “MP3”. The mixed mode is switched between CD type or MP3/WMA/AAC type.
• CD
When playing music CD only.
• MP3
When playing music MP3/WMA/AAC only.
4.When setting is completed, remove the disc and reinsert it.
CAUTION
•Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.
•Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.
Backup Eject function
Just pressing the [Q] button, ejects the disc even if the power to the unit was not turned on.
1.Press the [OPEN] button to open the FLIP DOWN PANEL.
Note:
•If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.
2.Press the [Q] button. Remove the disc after it is ejected.
3.Close the FLIP DOWN PANEL.
∗Press the center of the DCP to close.
Notes:
•Always close the FLIP DOWN PANEL once you take out the disc.
•If you force a CD into before auto reloading, this can damage the CD.
•If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).
Listening to a disc already loaded in the unit
English
Disc-In-Play function
As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on.
Press the [SRC] button to select the CD/MP3/ WMA/AAC mode.
When the unit enters the CD/MP3/WMA/AAC mode, play starts automatically.
If there is no disc loaded, the indication “NO DISC” appears in the title display.
DXZ575USB 17
