English
Basic Operations
2.Turning the [ROTARY] knob clockwise em- phasizes the treble; turning it counterclock- wise attenuates the treble.
∗The factory default setting is “TREBÅG 0Δ. (Adjustment range:
3.Press the [a] or [d] button to select “TREBÅF 12kΔ.
Turning the [ROTARY] knob clockwise or counterclockwise to select the frequency.
∗The factory default setting is “TREBÅF 12kΔ. (Adjustment 8 kHz/12 kHz)
4.When the adjustment is complete, press the
Adjusting the balance
1.Press the
2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.
∗The factory default setting is “BALANCE 0”. (Adjustment range: L13 to R13)
3.When the adjustment is complete, press the
Adjusting the fader
1.Press the
2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.
∗The factory default setting is “FADER 0”. (Ad- justment range: F12 to R12)
3.When the adjustment is complete, press the
Radio Operations
Listening to the radio
1.Press the [FNC] button and select the radio mode. The frequency or PS appears in the display.
∗ PS: Programme service name
2.Press the [BND] button and select the radio band. Each time the button is pressed, the ra- dio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1...
3.Press the [a] or [d] button to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity.
1.Press the [BND] button and select the de- sired band (FM or AM (MW, LW)).
2.Tune into a station.
∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.
∗If “TA” is lit in the display, TP stations are auto- matically sought.
●DX SEEK
Press the [a] or [d] button to automatically seek a station.
When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies.
∗When seek tuning starts, “DX SEEK” appears in the display.
●LOCAL SEEK
If you press and hold the [a] or [d] button for 1 second or longer, local seek tuning is carried out. Broadcast stations with good reception sensitivity are selected.
∗When local seeking starts, “LO SEEK” appears in the display.
14 DXZ848RMC