Problem

Cause

Measure

English

CD/MP3/WMA

Sound is bad

Water droplets may form on

Let dry for about 1 hour with the power on.

 

 

 

 

directly after

the internal lens when the

 

 

 

power is turned

car is parked in a humid

 

 

 

on.

place.

 

 

 

 

 

 

 

 

Wrong filename

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file

 

 

 

 

system.

 

 

 

 

 

 

 

Play list play is

File name or extension is not

Use alphanumeric/ASCII characters for MP3/WMA

 

 

not performed.

correct.

file name.

 

 

 

 

Use “.M3U” for the file extension of a play list.

 

 

 

 

 

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

 

Error Display

Cause

Measure

 

 

 

 

 

ERROR 2

A DISC is caught inside the CD deck and is

This is a failure of CD deck’s mechanism and

CD/MP3/WMA

 

not ejected.

consult your store of purchase.

 

 

 

ERROR 3

A DISC cannot be played due to scratches,

Replace with a non-scratched,

 

etc.

non-warped-disc.

 

 

 

ERROR 6

A DISC is loaded upside-down inside the

Eject the disc then reload it properly.

 

 

CD deck and does not play.

 

 

 

 

 

 

ERROR 7

The format of the flash memory is damaged.

Execute ALL ERASE on the flash memory,

 

 

 

and the problem is solved.

M.CATCHER

 

 

 

ERROR 8

There is a failure with the flash memory.

Turn POWER/ACC off and then turn it on

 

 

again, and the problem is solved.

 

 

If not solved, executed ALL ERASE on the

 

 

flash memory, and the problem is solved.

 

 

 

ERROR 9

An error during recording, scratch on the

Turn POWER/ACC off and then turn it on

 

 

 

disc, or error due to sound skips

again, or eject the CD. The problem is

 

 

 

solved.

 

 

 

 

 

AMP GUARD

The speaker protection circuit is operating.

1. Turn down sound volume. Function can

 

 

During this operation, if any volume

also be restored by turning the power off

General

 

operation is performed, the display shows

and on again.

 

AMP GUARD”.

(Speaker volume is reduced automatically

 

 

when the speaker protection circuit oper-

 

 

ates).

 

 

 

 

 

 

2. If the sound is muted again, consult our

 

 

 

service department.

 

 

 

 

 

ERROR 2

A DISC inside the CD changer is not

This is a failure of CD changer’s mechanism

changer

 

loaded.

and consult your store of purchase.

 

 

 

ERROR 3

A DISC inside the CD changer cannot be

Replace with a non-scratched, non-warped

 

played due to scratches, etc.

disc.

CD

 

 

 

ERROR 6

A DISC inside the CD changer cannot be

Eject the disc then reload it properly.

 

 

 

played because it is loaded upside-down.

 

 

 

 

 

38 DXZ848RMC