Digital Radio / DAB Operations
Switching programmes | Recalling a preset programme |
English
1.Press the [FNC] button to receive a DAB station.
2.Press the [a] or [d] button to switch programmes in the DAB station.
Note:
•The programme name may be the same depend- ing on DAB programmes.
Programme scan
1.Press the [FNC] button to select the DAB mode.
2.Press the [BND] button. Each time you press the [BND] button, the display changes in the following order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3.Press one of the [DIRECT] buttons to recall a preset programme.
Note:
This function scans through each receivable | • Press and hold the [DIRECT] button for 2 sec- |
programme in a DAB station being received for | onds or longer to store the programme currently |
10 seconds sequentially. This is useful when you | being received. (Manual memory) |
want to search for a desired programme. |
|
1.Press the [FNC] button to receive a DAB station.
2.Perform the following operation depending on the connected model.
Press the [P/A] button. “SERVICE SCN” lights up and the unit starts scanning each programme for 10 seconds sequentially. Each time the main unit scans, the programme name is shown in the display.
3.To stop programme scan when a desired programme is tuned in.
AF function
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
∗The factory default setting is “ON”
∗If the reception of the current broadcast station de- teriorates, “SEARCH” appears in the display and the radio searches for the same programme on another frequency.
∗For details on “AF function”, refer to the section “RDS operation” of each owner’s manual.
Press the [P/A] button.
Manual memory
The main unit has a manual memory function for DAB programmes. Up to 18 programmes (6 programmes each) can be preset in the preset buttons.
[M1], [M2] and [M3]
1.Press the [FNC] button to select the DAB mode.
2.Press the [BND] button to select any one shown above.
3.Press the [a] or [d] button to select a de- sired programme.
4.Press and hold one of the [DIRECT] buttons (1 to 6) for 2 seconds or longer to store the programme.
Note:
•The interrupt programme (PTY or INFO) cannot be written into a manual memory.
●Switching OFF the AF function
●Switching ON the AF function
●AF function between RDS and DAB
When the same programme is broadcast by both RDS and DAB, and this function is ON, the main unit switches to receiving the broadcast with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode. Traffic programme (TP) automatic tuning is also possible.
∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the DAB or RDS broadcast station being received has traffic announcement programmes.
∗For details on “TA”, refer to the section “RDS op- eration” of each owner’s manual.
●Setting the TA standby mode
●Cancelling the TA standby mode
●Searching for a TP station
34 DXZ848RMC