Basic Operations
2.Press and hold the
Note:
•When
Adjusting the Subwoofer
∗The factory default setting is
∗This function can be adjusted only when the subwoofer output is set to “ON”. For details on “Se- lecting the Subwoofer”, refer to the section “Op- erations Common to Each Mode” of each owner’s manual.
1.Press the
English
Setting the Anti Distortion Filter | 2. | Turning the [ROTARY] knob to select from |
The adopted “Liveliness Enhancement Filter” |
| to +6. |
and “Sound Tone Compensation” functions al- | 3. | When the adjustment is complete, press the |
low |
| |
fecting the characteristics of the original sound |
| mode is reached. |
|
|
tone.
This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.
∗The factory default setting is “ADF OFF”.
Each time you press the [ADF] button, the tone effect changes in the following order:
“ADF-1” ➜ “ADF-2” ➜ “ADF-3” ➜
“ADF OFF” ...
•
•
•
•ADF OFF : no sound effect
Notes:
•The volume changes each time the ADF (Anti Dis- tortion Filter) setting is switched. Turn down the volume and the
•Sufficient effects cannot be obtained with some speaker systems. In such cases, adjust the vol- ume.
Adjusting the tone
Press the
●When “ADF 1, 2, 3” is set
“SW-VOL 0” ➜ “BALANCE 0” ➜“FADER 0” ➜ Last function mode.
●When “ADF OFF” is set
Note:
•As subwoofer is effective,
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the ADF (Anti Distortion Filter) is set to “ADF OFF”.
1.Press the
2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.
∗The factory default setting is “BASSÅG 0Δ. (Adjustment range:
3.Press the [a] or [d] button to select “BASSÅF 50Δ.
Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency.
∗The factory default setting is “BASSÅF 50Δ.(Adjustment 50/80/120 Hz)
4.Press the [a] or [d] button to select “BASSÅQ 1Δ.
Turning the [ROTARY] knob clockwise or counterclockwise to select the
∗The factory default setting is “BASSÅQ 1Δ. (Adjustment 1/1.25/1.5/2)
5.When the adjustment is complete, press the
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the ADF (Anti Distortion Filter) is set to “ADF OFF”.
1.Press the
DXZ848RMC 13