English
6. OPERATIONS
Basic Operations | Note:Be sure to read this chapter referring to the front diagrams of |
chapter “2. CONTROLS” on page 5 (unfold). |
CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Adjusting the volume
1.Press the front part of the [ROTARY] knob. The knob will pop up.
2.Turning the [ROTARY] knob clockwise in- creases the volume; turning it counterclock- wise decreases the volume.
∗The volume level is from 0 (minimum) to 33 (maximum).
Turning on/off the power
Note:
•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.
1.Press the [FNC] button.
2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.
3.Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit.
Note:
•System check
The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, “SYSTEM CHCK” and “Push POWER” appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, press the [FNC] button again.
Selecting a mode
1.Press the [FNC] button to change the opera- tion mode.
2.Each time you press the [FNC] button, the op- eration mode changes in the following order: Radio mode ➜ DAB mode ➜ CD/MP3 mode
➜M.CATCHER mode ➜ CD changer mode
➜DVD changer mode ➜ TV mode ➜ AUX mode ➜ Radio mode...
∗External equipment not connected with CeNET is not displayed.
Switching the display
1.Press the [D] button to select the desired dis- play.
2.Each time you press the [D] button, the dis- play switches in the following order:
Main display ➜ Clock (CT) display ➜ Main display
∗Once selected, the preferred display becomes the display default. When a function adjust- ment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display sev- eral seconds after the adjustment.
∗For information on how to enter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode”.
CT (Clock Time) function
The CT function receives CT data sent from an RDS station and displays the time. Press the [D] button to switch to the CT display.
∗If a CT data is not being received,
Note:
•CT data is not transmitted in some countries and by some broadcast stations. Also, in some areas, the CT may not display accurately.
Setting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
∗The factory default setting is off.
1.Press and hold the
12 DXZ848RMC