Digital Radio / DAB Operations

Notes:

•If a TP station is not received, the main unit stops the search operation.

•“TP” may be lit in the display when a TP broad- cast is transmitted from an RDS station. In this case, press the [TA] button to perform TP seek tuning. Press the [TA] button again to return to the previous mode.

INFO (Announcement)

In the INFO standby mode, when the selected announcement programme starts, the main unit switches to the selected announcement programme automatically.

●Setting the INFO standby mode

If you press and hold the [TA] button for 1 second or longer, “INFO” lights in the display and the main unit is set into the INFO standby mode until the selected announcement is broadcast. When the selected announcement broadcast starts, the announcement item appears in the display. If you press and hold the [TA] button for 1 second or longer while the selected announcement broadcast is being received, the selected announcement broadcast reception is cancelled and the main unit goes into the INFO standby mode.

●Cancelling INFO standby mode

To cancel the INFO standby mode, press and hold the [TA] button for 1 second or longer.

●Information select

This is a function for selecting INFORMATION ON or OFF in the Information interrupt mode. You can set ON up to 6 information items.

You can select any of the 6 items below:

INFORMATION item

ENGLISH

Contents

Travel

Transport flash

Warning

Warning / Service

News

News flash

Weather

Area weather flash

Event

Event announcement

Special

Special event

 

 

1.Perform the following operation depending on the connected model.

Press and hold the [T] button for 1 second or longer.

2.Press the [a] or [d] button to select “INFO

SEL ”, then press the [ ] button to enter “INFO SEL” mode.

3.Press the [a] or [d] button to select an in- formation item. You can select any of 6 items:

Travel ➜ Warning ➜News ➜ Weather ➜ Event ➜ Special ➜ Travel ➜ ...

4.Turning the [ROTARY] knob clockwise or counterclock wise to set the information item for ON or OFF.

5.Press the [ ] button to store the setting.

6.Press the [T] button to return to the previous display.

PTY

This function enables you to listen to the selected programme type, irrespective of the function mode.

∗One common PTY can be selected for DAB or RDS.

∗Of DAB PTY and RDS PTY, the PTY which is re- ceived earlier takes priority over the other.

∗PTY broadcasts are not yet available in all coun- tries.

∗In the INFO standby mode, INFO stations have pri- ority over PTY stations.

∗In the TA standby mode, TP stations have priority over PTY stations.

∗For details on “PTY”, refer to the section “RDS op- eration” of each owner’s manual.

●Setting the PTY standby mode

●Cancelling the PTY standby mode

●Cancelling a PTY interrupt broadcast

●Selecting PTY

●PTY seek

●PTY preset memory

Emergency broadcast

When an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emergency broadcast can be heard.

∗For details on “Emergency broadcast”, refer to the section “RDS operation” of each owner’s manual.

●Cancelling an emergency broadcast

English

DXZ848RMC 35