Operations Common to Each Mode
Dimmer control
You can setting the dimmer control “ON” or “OFF”.
∗The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “DIM- MER”.
3.Turning the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select “BLINK LED”.
3.Turning the [ROTARY] knob clockwise to set this function “ON” or turn it counterclockwise to switch this function “OFF”.
4.Press the [T] button to return to the previous mode.
English
4.Press the [T] button to return to the previous mode.
Dimmer in control
You can setting the dimmer in control AUTO or
ILLUMI.
∗The factory default setting is
Setting the Subwoofer
∗The factory default setting is
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “DIM- MER IN”.
3.Turning the [ROTARY] knob clockwise or counterclockwise and select
4.Press the [T] button to return to the previous mode.
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
∗The factory default setting is “8”. (Adjustment level:1to 16)
3.Turning the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
4.Press the [T] button to return to the previous mode.
Setting LOW PASS FILTER
∗The factory default setting is “THRGH”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select
3.Turning the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turning the [ROTARY] knob, the set- ting changes in the following order:
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CONTRAST”.
3.Turning the [ROTARY] knob clockwise or counterclockwise to adjust the contrast.
4.Press the [T] button to return to the previous mode.
Anti-theft indicator
The red
∗The factory default setting is “OFF”.
THRGH ➜ 50 Hz ➜ 80 Hz ➜ 120 Hz
4.Press the [T] button to return to the previous mode.
Setting the external amplifier
∗The factory default setting is “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select “AMP CANCEL”.
DXZ848RMC 27