8. IN CASE OF DIFFICULTY

 

Problem

Cause

Measure

 

 

Power does not

Fuse is blown.

Replace with a fuse of the same amperage. If the

 

turn on.

 

fuse blows again, consult your store of purchase.

 

(No sound is

 

 

 

 

 

 

 

 

produced.)

Incorrect wiring.

Consult your store of purchase.

 

 

 

 

 

 

 

No sound output

Power antenna lead is

1. Turn the unit off.

 

 

when operating

shorted to ground or

2. Remove all wires attached to the power antenna

 

the unit with

excessive current is required

lead. Check each wire for a possible short to

 

amplifiers or

for remote-on the amplifiers

ground using an ohm meter.

 

 

power antenna

or power antenna.

3. Turn the unit back on.

 

 

attached.

 

4. Reconnect each amplifier remote wire to the

General

 

 

power antenna lead one by one. If the amplifiers

 

 

turn off before all wires are attached, use an

 

 

 

 

 

 

external relay to provide remote-on voltage

 

 

 

(excessive current required).

 

 

 

 

 

 

 

Nothing happens

The microprocessor has

Turn off the power, then

Reset button

 

when buttons are

malfunctioned due to noise,

press the [RELEASE]

 

 

pressed.

etc.

button and remove the DCP.

 

 

 

 

Press the reset button for

 

 

Display is not

 

about 2 seconds with a thin

 

 

accurate.

 

rod.

 

 

 

 

 

 

 

DCP or main unit connectors

Wipe the dirt off with a soft cloth moistened with

 

 

are dirty.

cleaning alcohol.

 

 

 

 

 

 

No sound heard.

There is a disc other than a

With the sloping console open, press and hold the

 

 

compact disc or foreign

[Q] button for 3 seconds or longer.

 

 

 

matter already in place.

The foreign matter is forcibly ejected.

 

 

 

 

 

 

 

MP3/WMA files are absent

Write MP3/WMA files onto the disc properly.

 

 

in a disc.

 

 

 

 

 

 

 

 

 

Files are not recognized as

Use MP3/WMA files encoded properly.

 

 

 

an MP3/WMA file.

 

 

CD/MP3/WMA

noisy.

 

 

 

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo file

 

 

 

 

 

system.

 

 

 

 

 

 

 

Sound skips or is

Disc is dirty.

Clean the disc with a soft cloth.

 

 

 

 

 

 

 

 

Disc is heavily scratched or

Replace with a disc with no scratches.

 

 

 

warped.

 

 

 

 

 

 

 

 

Sound is cut or

MP3/WMA files are not

Use MP3/WMA files encoded properly.

 

 

skipped.

encoded properly.

 

 

 

Noise is

 

 

 

 

generated or

 

 

 

 

noise is mixed

 

 

 

 

with sound.

 

 

 

 

 

 

 

 

English

DXZ848RMC 37