English

5. DCP

The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.

We recommend taking the DCP with you when leaving the car.

Attaching the DCP

1.Place the DCP to the SLOPING CONSOLE, adjusting the metal connecters on DCP and the SLOPING CONSOLE.

2.Press the DCP until it clicks into the

SLOPING CONSOLE.

Removing the DCP

1.Press the [Q] button to open the DCP.

2.Move the DCP detaching slider to the “RELEASE” side.

3. Push and slide the DCP upward to remove.

* The DCP display lights and is ready to use.

∗The SLOPING CONSOLE without DCP closes automatically in a few seconds.

CAUTION

•Do not try to remove or attach while driving.

•The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.

•If you purchased a replacement DCP, an electrical adjustment is necessary. This adjustment requires technical knowledge.

Please consult Clarion service or a Clarion service station.

CAUTION

•If the slider is on the [RELEASE] side and the DCP is not locked into place, it may fall out from vibration of the car. This can break the DCP, so after removing it, either firmly reattach it on the unit or put it in its DCP case.

•The connector connecting the unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.

Note:

•If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.

10 DXZ866MP