7. OPERATIONS

Basic Operations

CAUTION

Selecting a mode

English

Be sure to lower the volume before switching the unit off or the ignition key. The unit remembers its last volume setting. If you switch the power OFF with the volume up, when you switch the power back ON, the sudden loud volume may hurt your hearing and damage the unit.

Turning ON/OFF the power
Turning on

Note:

Be careful when using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [ROTARY] knob.

The mode that was previously active is displayed.

Turning off

1.Press the [ROTARY] knob.

The clock will stay displayed after the power is turned OFF.

To turn off the clock display

Touch the clock to turn off the clock display while the power is off.

CODEMATIC function

When “CODEMATIC” is set to “ON”, and the power is turned ON with the DCP attached, the Touch Code display appears. Touch the display in the order that was set in the adjust mode.

ADJ SETTING

CODEMATIC OFF

RTN

For details on the CODEMATIC function, see “Using the security function” (cf. page 34).

1.Press the [SRC] button to change the operation mode.

2.Each time you press the [SRC] button, the operation mode changes in the following order:

Radio CD/MP3 (CD changer) (DVD changer) (TV) AUX Radio...

External equipment not connected with CeNET is not displayed.

Adjusting the volume

1.Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.

The volume level is from 0 (minimum) to 33 (maximum).

Switching the operation display mode

There are 2 basic operation displays: standard operation display and simple operation display.

1.Press and hold the [MODE] button for 2 seconds or longer to switch the operation display.

 

 

 

 

 

 

FM1

 

SEEK

 

 

 

 

 

 

P.CH

 

 

98.10

 

 

 

2:45 pm

 

P3

 

 

PRESET

BAND

PS/AS

DISP

 

 

 

 

 

In the simple operation display, the operations of

touching in the radio or CD mode display screen are not required.

Descriptions given in this manual are mainly for the standard operation display. For descriptions for operations in the simple operation display, refer to the descriptions for the screen displays in the radio mode or the CD mode.

DXZ866MP 13