Common Operations
English
When the power is OFF, the clock is displayed.
The clock is displayed in
1.Press the [ADJ] button.
2.Touch [APPEARANCE].
3.Touch on the left of the display to select "MSG INFO".
ADJ APPEARANCE
MSG I N F O OFF
RTN
3. Touch | on the left slide button to select | 4. | Touch | on the right of the display to | |||
“CLOCK EDIT” and touch [ENT]. |
|
| |||||
|
|
| select “ON” or “OFF”. | ||||
|
|
|
|
|
| ||
|
| ADJ APPEARANCE |
|
| 5. | Press the [ADJ] button to return to the | |
| CLOCK EDIT | [ENT] |
| ||||
|
|
| original mode. | ||||
|
|
|
|
|
| ||
|
| RTN |
|
|
|
|
|
The time (e.g. “2pm:45”) currently set on this unit is displayed, and the mode changes to the time setting mode.
4.Touch on the left slide button to set hours.
ADJ APPEARANCE CLOCK
2pm : 45
SET | RTN |
∗If you operate another button while you are setting the time, the time is not adjusted.
5.Touch on the right slide button to set minutes.
6.Touch [SET].
∗You will hear a long beep, and the time is set.
Notes:
•The clock cannot be adjusted when the power is OFF.
•When the battery has been removed for maintenance or for repair, set the time again.
7.Press the [ADJ] button to return to the original mode.
•Up to 30 characters can be entered.
•The factory default setting is “Welcome to Optimedia”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
3.Touch on the left of the display to select "MSG INPUT".
MSG INPUT | [ENT] |
RTN
4.Touch [ENT].
The mode changes to the message entry mode.
5.Touch []/[] to determine the entry position.
MESSAGE INPUT
|
|
| We I come to |
|
|
| |
| A |
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FONT |
|
|
|
| TEXT | |
|
| MEMO | RTN |
This function allows you to display a message on the display when no operation is performed for more than 30 seconds.
• The factory default setting is “OFF”.
1.Press the [ADJ] button to set to the adjust mode.
2.Touch [APPEARANCE].
6.Touch on [FONT] to select the type of text.
Each touch of switches the type of text. For details, see page 27.
7.Touch on [TEXT] to determine the character to enter.
8.Repeat steps 5 to 7 to enter the message.
9.Touch [MEMO].
You will hear a long beep, and the message is stored in memory.
10.Press the [ADJ] button to return to the original mode.
30 DXZ866MP