English

4. NOMENCLATURE

Names of the Buttons and their Functions

IR-Receiver

•Receiver for remote control unit. (Operating range: 30° in all directions)

[ADJ] button

•Use this button to set or adjust the various settings in the adjust mode.

[ROTARY] knob

•Press the knob to turn the power ON.

•Press the knob to turn the power OFF.

•Turn the knob to adjust the volume.

[CD SLOT]

• CD insertion slot.

[Q] (OPEN/EJECT) button

•Open/closes the control panel.

To eject a disc, open the control panel first, and then press this button once again.

Photo Sensor

•This sensor detects the brightness inside your car. When the auto-dimmer function is set to “AUTO”, the brightness of the display is dimmed according to the brightness detected by this sensor.

DCP Detaching Slider

• Removes the DCP.

Display

•Displays the various information that indicates the operating state of this unit such as tuning/ play state and indicators.

•You can operate the display by touching or

touching the surface. (cf. page 9)

[MODE] button

•Use this button to play in scan, repeat, or random mode.

•Press and hold this button for 2 seconds or longer to switch between standard and simple operation displays.

[ ] (SOUND) button

•Use this button for setting or adjusting various settings such as ADF.

[ISR] (Instant Station Recall) button

•Immediately calls up a favorite radio station regardless of the current mode. (This is the ISR function.) You can store radio stations to the [ISR] button by holding this button down for 2 seconds or longer in the radio mode.

[SRC] button

•Switches among sound sources as shown below.

Radio ➜ CD/MP3 ➜ (CD changer) ➜

(DVD changer) ➜ (TV) ➜ AUX ➜ Radio...

Note:

External equipment not connected with CeNET is not displayed.

6 DXZ866MP