Common Operations

Setting the auto-dimmer (DIMMER IN)

This function allows you to dim the lighting of the display matched to the illumination or the brightness inside your car.

Select either “AUTO” (interlocked to the brightness inside your car) or “ILLUMI” (interlocked to the illumination inside your car) as the auto-dimmer setting.

•When the auto-dimmer function is set to “AUTO”, the brightness of the display is dimmed according to the brightness detected by this sensor.

•Set the dimmer setting at DMR LEVEL.

•The factory default setting is “AUTO”.

1.Press the [ADJ] button to set to the adjust mode.

2.Touch [APPEARANCE].

3.Touch on the left of the display to select “DIMMER IN”.

ADJ APPEARANCE

D I MMER I N AUTO

RTN

4.Touch on the right of the display to select “AUTO” or “ILLUMI”.

5.Press the [ADJ] button to return to the original mode.

5.Press the [ADJ] button to return to the original mode.

Adjusting the brightness of the display (BRIGHT)

You can adjust the brightness of the display to match the mounting angle of the unit.

• The factory default setting is “5”.

1.Press the [ADJ] button to set to the adjust mode.

2.Touch [APPEARANCE].

3.Touchon the left of the display to select “BRIGHT”.

ADJ APPEARANCE

BRIGHT 5

RTN

4.Touchon the right of the display to adjust the brightness.

∗This setting item can be adjusted within the range 1 to 12.

Adjust this setting item while viewing how the appearance of the display changes.

5.Press the [ADJ] button to return to the original mode.

English

Setting the dimmer level (DMR LEVEL)

This function allows you to set how much the displayed is to be dimmed.

• The factory default setting is “3”.

1.Press the [ADJ] button to set to the adjust mode.

2.Touch [APPEARANCE].

3.Touch on the left of the display to select “DMR LEVEL”.

ADJ APPEARANCE

DMR L E V E L 3

RTN

4.Touchon the right of the display to set the dimmer level.

∗Select one of OFF (dimming OFF, bright), 1 (slightly dimmed) to 5 (dark).

Making the LED blink when DCP is removed (BLINK LED)

You can make the LED on this unit blink when the DCP is removed.

• The factory default setting is “OFF”.

1.Press the [ADJ] button to set to the adjust mode.

2.Touch [APPEARANCE].

3.Touchon the left of the display to select “BLINK LED”.

ADJ APPEARANCE

BL INK LED OFF

RTN

4.Touchon the right of the display to select “ON” or “OFF”.

5.Press the [ADJ] button to return to the original mode.

DXZ866MP 31