Seek tuning is a function for automatically tuning stations with good reception.
1.Touch and hold [BAND] for 1 second or longer if “MANU” is displayed.
Automatic tuning is possible when “SEEK” is displayed.
2.Touch on the frequency display.
“SEEK UP”/“SEEK DOWN” is displayed, and tuning starts.
Tuning automatically stops at stations with good reception.
■To cancel tuning
1. Touch on the frequency display again.
A total of 24 preset positions
1.Touch [BAND] to switch the reception band.
2.Operate the frequency display to tune to a frequency to store.
3.Touch [PRESET].
The preset memory No. list is displayed.
4.Touch and hold the preset No. to store the station to for 2 seconds or longer.
You will hear a long beep, and the station is stored in memory.
English
There are 2 ways available: quick tuning and step tuning.
In the step tuning mode, the frequency changes 1 step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Touch and hold [BAND] for 1 second or longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is displayed.
2.Operate the frequency display to tune to a frequency on which there is a broadcast.
●Step tuning
Touchon the frequency display.
●Quick tuning
Touchon the frequency display. Tuning stops when you take your finger away from the panel.
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
1.Touch and hold [PS/AS] for 2 seconds or longer.
∗Stations with good reception are automatically searched, and are stored to preset memory (No.1 to No.6) in order from the station having the lowest frequency.
Notes:
•When auto store is performed, stations stored to memory so far are cleared.
•When there are fewer than 6 stations with good reception, low frequencies are automatically returned to, and auto store is performed again. If there are fewer than 6 stations even after auto store is performed twice, stations stored so far remain in memory.
Recalling a preset station is a function for tuning
1.Touch [PRESET].
The preset memory No. list is displayed.
2.Touch the preset memory No.
∗In the standard operation display, preset
No. can also be tuned by touching .
■To cancel tuning
1. Touch [RTN].
Preset scan is a function for receiving stations in the order that they are currently stored to preset No. so that broadcasts can be checked.
1.Touch [PS/AS].
∗The currently stored stations are received in order for 7 seconds or longer each. Stations with poor reception are skipped, and the next station is received.
DXZ866MP 17