Seek tuning | Preset memory |
English
Seek tuning is a function for automatically tuning stations with good reception.
1.Touch and hold [BAND] for 1 second or longer while “MANU” is displayed. Automatic tuning is possible when “SEEK” is displayed.
2.Touch on the channel display.
“SEEK UP/SEEK DOWN” is displayed, and tuning starts.
Tuning automatically stops at stations with good reception.
■To cancel tuning
1. Touch on the channel display again.
A total of 12 TV stations can be stored
1.Touch [BAND] to switch the reception band.
2.Operate the channel display to select the station to store to.
3.Touch [PRESET].
The preset memory No. list is displayed.
4.Touch and hold the preset No. to store for 2 seconds or longer.
You will hear a long beep, and the station is stored in memory.
Manual tuning
There are 2 ways available: quick tuning and step tuning.
In the step tuning mode, the frequency changes 1 step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Touch and hold [BAND] for 1 second or longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is displayed.
2.Operate the channel display to tune to a channel on which there is a broadcast.
●Step tuning
Touch on the channel display.
●Quick tuning
Touch on the channel display. Tuning stops when you take your finger away from the panel.
Auto store
Auto store selects 6 TV stations automatically and stores each one into preset memory.
1.Touch and hold [PS/AS] for 2 seconds or longer.
∗Stations with good reception are automatically searched, and are stored to preset memory (No.1 to No.6) in order from the station having the lowest frequency.
Notes:
•When auto store is performed, stations stored to memory so far are cleared.
•When there are fewer than 6 stations with good reception, low frequencies are automatically returned to, and auto store is performed again. If there are fewer than 6 stations even after auto store is performed twice, stations stored so far remain in memory.
Recalling a preset station
This function allows the user to select a preset station.
1.Touch [PRESET].
The preset memory No. list is displayed.
2.Touch the preset memory No.
∗The station can also be tuned by touching in the standard operation display.
■To cancel tuning
1. Touch [RTN].
Preset scan
Preset scan is a function for receiving stations in the order that they are currently stored to preset No. so that broadcasts can be checked.
1.Touch [PS/AS].
∗The currently stored stations are received in order for 7 seconds or longer each. Stations with poor reception are skipped, and the next station is received.
DXZ866MP 39