English

Basic Operations

manual Owner’s

Turning on/off the motion of the background picture

2-1. Touch the [ON] or [OFF] key of the MOTION item to set the function (The factory default setting is “ON”).

Front monitor lock

When an external device is connected to the Visual terminal, lock the front monitor to show the visual input source.

Note:

•This function is enabled only when the CONNECT item of the GENERAL menu is set to other than “NONE”.

1.Press the [MAP] button to set the monitor lock.

The front monitor screen is locked to show the visual input source.

2.To cancel the monitor lock, press the [MAP] button.

The screen returns to show the image of the selected mode.

Adjusting the GENERAL

1.Press the [ADJ] button, then touch the [GENERAL] key.

Setting the BEEP

The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound.

• The factory default setting is “ON”.

3-1. Touch the [ON] or [OFF] key of the BEEP item to turn the function on or off.

Setting the Blink LED

When this function is set to “ON”, the Blink LED indicator will blink when the power is turned off.

3-1. Touch the [ON] or [OFF] key of the BLINK LED item to turn the function on or off (The factory default setting is “OFF”).

•Setting the CATS function (see page 28) turns on the Blink LED function as well.

Performing the system check

3-1. Touch the []] key of the SYSTEM CHECK item.

3-2. Touch [Check] key at the top right of the

screen to perform the system check manually.

The system will be restarted after performing the system check.

2.Touch the [C] key to display the next menu screen if desired.

3.Perform the adjustment for the desired item. See the following sections for detail.

4.Touch the [Back] key to return to the previous screen.

* In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.

Changing the output speaker for the mobile phone

•The factory default setting is “RIGHT”.

•To output the telephone calls, set the following TEL SWITCH item to “ON”.

3-1. Touch the []] key to display the next menu screen.

3-2. Touch the [LEFT] or [RIGHT] key of the TEL SP item to set to “LEFT” or “RIGHT”.

LEFT:

Telephone calls are heard from the left speaker connected to this unit.

RIGHT:

Telephone calls are heard from the right speaker connected to this unit.

Note:

•During mobile phone interrupts, setting this function is disabled.

26 MAX678RVD