English

NAVI Operations (NAX973HD/NAX963HD, etc.)

manual Owner’s

NAVI functions

Note:

•Hereafter in this section, the Navigation system will be called as “NAVI”.

•When the Clarion NAVI NAX963HD is connected, the following functions are available:

•Showing the NAVI display

•Operation by using the panel side buttons

•NAVI guidance voice interruption

•When the NAVI (NAX963HD) is being used…

•If the 5.1ch surround decoder (DVH943) is connected, the voice interruptions of the NAVI will not work.

•If the 5.1ch surround decoder (DVH943N) is connected, the voice interruptions of the NAVI will work.

•When a voice interrupt of the NAVI arises during 2- ZONE ON, the sound of the MAIN zone is muted, and the sound of the SUB zone is output normally. When it arises during 2-ZONE OFF, the audio signals to the 4ch speakers are attenuated, and the voice from the navigation system is output from the front two speakers.

•Since the Clarion NAVI (NAX963HD) is automatically recognised, you can omit the below- mentioned CONNECT setting.

Setting NAVI as external input equipment

Perform this setting after connecting NAVI.

• The factory default setting is “NONE”.

1.Press the [ADJ] button, and touch the [GENERAL] key.

2.Touch the []] key of the CONNECT item, and touch the [RGB], [COMPOSITE], [OTHERS] or [NONE] to set the function.

RGB:

Select when the Clarion NAVI (NAX943DV, NAX9500E) is connected.

Control of it can be made only from the remote control unit, and the NAVI voices are output from the special speakers for the NAVI.

* Do NOT connect the NAX943DV or NAX9500E to the CCD terminal of the main unit; they can only be connected to the RGB input terminal of the main unit via RGB cable.

COMPOSITE:

Select when a NAVI of the other manufacturer is connected.

Control of it can be made only from the remote control unit, and the NAVI voices are output from the special speakers for the NAVI.

OTHERS:

Select for external devices other than a NAVI. NONE:

Select when no external device is connected.

NAVI operation

Changes between the NAVI display and the Audio/Visual (hereinafter, refered as “AV”) display.

Note:

•The below-mentioned [NAVI] and [AV] keys are available only when the Clarion NAVI (NAX963HD) is connected.

When the other NAVI is connected, use the [MAP] button to switch the screen mode.

●AV screen

[MAP] key

When the image interruption from the NAVI arises, the screen will be changed from the AV screen to the NAVI screen. When the interruption is finished, the screen will return to the previous AV screen.

●NAVI screen

[AV] key

Audio operations made in the NAVI mode will be indicated for about 2 seconds at the bottom of the NAVI screen.

●Operations using the buttons

[VOICE] button

•The VOICE screen of the NAVI mode is displayed.

•When in the AV mode, it is changed to the NAVI mode, and the VOICE operation is performed.

[MAP] button

•The MAP screen of the NAVI mode is displayed.

•When in the AV mode, it is changed to the NAVI mode.

62 MAX678RVD