English

5.1 ch Surround Decoder Operations

manual Owner’s

This function is available when an optional 5.1 ch Surround Decoder (DVH943N) is connected. When the 5.1 ch Surround Decoder is connected through the CeNET cable, the 5.1 ch Surround Decoder Control unit (DVC923, optional) cannot be used.

5.1ch Surround Decoder control function

This section describes operation procedures of setting functions.

For details on each function, refer to the owner’s manual supplied with the 5.1 ch Surround Decoder.

*Requires an optional amplifier.

Note:

•The 2-ZONE mode is disabled when the DVH943N is connected.

•The AUTO VOLUME function cannot be operated. 1. Press the [ADJ] button to display the ADJUST

menu.

2. Touch the [AUDIO EXT.] key.

3.Perform setting for the desired item. See the following sections for details.

4.Touch the [Back] key to return to the previous screen.

* In the following sections, only the details regarding settings are described, procedures to select setting items are skipped.

●SPEAKER SEL (speaker selection)

This function determines centre speaker, surround speaker and subwoofer connection.

3-1. Touch the []] key of the SPEAKER SEL item to show the submenu.

3-2. Touch the [ON] or [OFF] key of the CENTER SP, SURROUND SP or SUBWOOFER item to turn speakers on or off, depending on what speakers are connected.

•The factory default setting is “ON”.

•The phase of the “SUBWOOFER” is reversed in the “ON-” setting. The default value is “ON+”.

●Dolby PLII CONTROL

*This function is available only when the MUSIC MODE is selected for Dolby PLII. For setup details, see “Selecting the Dolby PLII (Dolby Pro Logic II) type” (page 67).

3-1. Touch the []] key of the Dolby PLII CONTROL item to show the submenu.

3-2. Perform setting for the PANORAMA, DIMENSION or CENTER WIDTH item.

[PANORAMA]:

Touch the [ON] or [OFF] key to select. “OFF” is the default value.

[DIMENSION]:

Touch the [[] or []] key to adjust the level between 0 and 6. The default level is “3”.

[CENTER WIDTH]:

Touch the [[] or []] key to adjust the level between 0 and 7. The default level is “3”.

64 MAX678RVD