Installing the Main Unit in a TOYOTA Vehicle

Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.)

INSTALLATION English MANUAL

Main Unit

Centre Panel

 

(* 2)

* 3

 

8-Hexagonal screw

(M5 ⋅ 8)

Mounting bracket (1 pair for the left and right sides)

Figure 7

Note:

*2: Some panel openings are too small for the unit depending on the vehicle type and model. In such a case, trim the upper and lower sides of the panel frame by about 0.5 to 1.5 mm so the unit can be inserted smoothly.

*3: If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or similar tool.

Typical Mounting Brackets

Example 1

Example 2

Example 3

Affix the screws to the ● marks.

Vehicles other than NISSAN and TOYOTA

In some cases the centre panel may require modification. (Trimming, filing, etc.)

●Removing the Main Unit

When the main unit is to be removed, disassemble it in the reverse of the order in “INSTALLING THE MAIN UNIT” (see page 74).

MAX678RVD 75