Basic Operations

English

Mobile phone interrupt setting

When you connect your mobile phone to this unit using a separately sold cable, you can listen to your telephone calls on your car speakers.

• The factory default setting is “OFF”.

3-1. Touch the []] key to display the next menu screen.

3-2. Touch the [ON], [OFF] or [MUTE] key of the TEL SWITCH item to set to “ON”, “OFF” or “MUTE”.

ON:

You can listen to your telephone calls from the speakers connected to this unit.

*When listening to your calls on your car speakers, you can adjust the volume using the [+]/[–] buttons.

OFF:

This unit continues normal operation even when you use the mobile phone.

MUTE:

The sound from this unit is muted during telephone calls.

Note:

•This function is not compatible with all mobile telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.

•When you set this function to “OFF”, disconnect the mobile phone from the cable or turn off the power of the mobile phone.

Switching CONNECT (connect)

Make the following settings when an external device is connected to the Visual terminal.

Note:

•This function is not available when the Clarion navigation system (NAX963HD) is connected.

•When the navigation system is connected, use the monitor lock function. Locking the monitor locks the screen size in F.WIDE mode (full wide), and the VTR system to NTSC if the CONNECT item is set to [COMPOSITE].

RGB:

Select when the Clarion navigation system (NAX943DV, NAX9500E) is connected.

COMPOSITE:

Select when a navigation system of the other manufacturer is connected.

OTHERS:

Select for external devices other than a navigation system.

NONE:

Select when no external device is connected.

• The factory default setting is “NONE”.

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the []] key of the CONNECT item to display the CONNECT screen.

3-3. Touch the [RGB], [COMPOSITE], [OTHERS] or [NONE] to set the function.

manual Owner’s

Setting the voice input line for the mobile phone

When you connect your mobile phone to this unit, select the connection method of the adaptor box.

• The factory default setting is “CeNET”.

3-1. Touch the [C] key to display the next menu screen.

3-2. Touch the [CeNET] or [AUX] key of the TEL SELECT item to set to “CeNET” or “AUX”.

CeNET:

Selects when the adaptor box (BLT433) is connected via the CeNET.

AUX:

Selects when the adaptor box (BLT373) is connected to Audio (left/right) of the Visual input terminal.

Note:

•When setting to “AUX”, the VISUAL mode is altered to the ACCESSORY mode.

Selecting the PTY display language

See the section entitled “Switching the PTY display language” (page 36).

Linking AF functions in the RDS and DAB modes

See the section entitled “AF function between RDS and DAB” (page 33).

MAX678RVD 27