Digital Radio/DAB Operations

English

Storing a programme to preset memory

1.Press the [BAND] button or touch the [Band] key to select the desired band (M1, M2 or M3).

2.Receive the programme you wish to store by performing the seek tuning, etc.

3.Touch the [List] key.

4.Touch and hold the desired preset key for more than 2 seconds to store the current programme.

PTY

This function enables you to listen to the selected programme type, regardless of the function mode.

•DAB and RDS have the same PTY.

•You can select one PTY from DAB or RDS.

•PTY broadcast are not yet available in all countries.

•In the information standby mode, INFO stations have priority over PTY stations.

•In the TA standby mode, TP stations have priority over PTY stations.

manual Owner’s

Information standby mode

When the Information programme selected in the INFO SELECT screen of the DAB Option menu starts, the unit switches to the selected Information programme automatically.

•For details on Information Select, refer to the section “Information select” below.

1.Keep pressing the [TA] button more than 1 second.

“INFO” is displayed on the screen, and this unit enters to the Information standby mode until information starts.

•If you press the [TA] button while the Information programme is being received, receiving programme is cancelled, and the unit enters to the Information standby mode.

2.To cancel the Information standby mode, keep pressing the [TA] button again more than 1 second.

Note:

•Only when the DAB tuner is connected, this can be operated even in the RDS mode.

Information select

This function allows you to specify a type of Information for the Information interrupt mode. You can set any of the following 6 types of Information:

TRAVEL, WARNING, NEWS, WEATHER , EVENT, and SPECIAL.

1.Touch the [Option] key, and then touch the []] key of the INFO SELECT item.

The INFO SELECT screen is displayed.

2.Touch the [ON] or [OFF] key of the desired Information item.

3.Touch the [Back] key to return to the previous screen.

Dynamic Label Function

A dynamic label (hereinafter referred to as “DLS”) is a text data associated with each DAB service. This unit can display a DLS up to 128 characters on the screen.

DLS display mode

Normally, 16 letters x 1 line are displayed on the DAB mode screen.

1.Touch the []] key on the DAB mode screen to display all DLS text.

2.To cancel the DLS mode and return to the previous screen, touch the [Back] key.

If there is a DLS data in the reception service, the DLS text is displayed in the text displaying area.

DLS memory

Up to 6 DLSs, currently being received, can be stored.

1.Touch the []] key on the DAB mode screen.

2.Touch and hold the desired preset [1] to [6] key more than 2 seconds.

The DLS data currently being displayed is stored.

DLS calling

1.To call the DLS stored in the DLS memory, touch the desired preset [1] to [6] key.

The DLS data in the DLS memory is displayed up to 128 characters.

2.To cancel the DLS mode and return to the previous display, touch the [Back] key.

MAX678RVD 61